Boeing

Boeing United States
May 22, 2019
Full time
Position Overview This RF/Microwave Metrology Engineer (Level 3) position supports our Corporate business unit within the Boeing Test & Evaluation (BT&E) organization. Position will support the statement of work on programs and projects in El Segundo and our Satellite Development Center. Programs supported include the company's major commercial and government satellite and ground programs for communications, national defense and other missions. Primary Responsibilities Supports the development and verification of test methods. Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan. Develops solutions to calibration systems problems of limited scope and impact. Designs test hardware, software and systems to achieve test requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world. Division Engineering Test and Tech Relocation Assistance Available No. Relocation assistance is not a negotiable benefit. Qualifications This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Basic (Required) Qualifications Bachelor's Degree or higher is required. RF/Microwave experience. Preferred (Desired) Qualifications Experience with Metrology and calibration lab processes and procedures. Experience with Microsoft Windows and Microsoft office applications. Experience with calibration automation software. Examples: Fluke MetTeam & Fluke MetCal, Keysight TME, Northrup Grumman SureCal. Experience with RF connector care. Experience calibrating PNA Keysight Network Analyzers. Ability to travel to other Boeing sites for training. Experience communicating with customers in a clear and concise manner about technical details of a calibration process. Experience Level Individual Contributor Job Type Standard Travel Yes, 10 % of the Time Contingent Upon Program Award No Union No Job Code 6L9BP3 Apply
Boeing United States
May 20, 2019
Full time
The Boeing Company's Training Systems & Government Services division has openings for entry level and experienced software engineers for the F-15 International Trainer Programs in Saint Louis, MO. This is an excellent opportunity to work with F-15 Aircrew devices used to train pilots how to fly and operate the various F-15 systems. POSITION RESPONSIBILITIES: The software team functions as a large scale Agile Team and is responsible for developing the aircraft simulation and system software for F-15 International customers, including Singapore, Korea, Saudi Arabia & Qatar. This development includes incorporating the newest F-15 aircraft technologies into high-fidelity integrated simulators to support international customer's Aircrew Training needs. The job covers the complete software development life cycle from requirements analysis through integration, test and sell-off to the customer The Boeing Agile Software Process (BASP) will be utilized, so experience with BASP or other Agile implementations is desirable. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Boeing Albuquerque, NM, USA
May 20, 2019
Full time
The Boeing Company is seeking skilled and adaptable Software Engineers to perform software design, analysis, and test of integrated software/hardware solutions in Albuquerque, NM. The engineer would work as part of a multi-disciplinary team supporting the development of both directed energy and electro-optical systems. Boeing Laser and Electro-Optical systems (LEOS) develops high performance Directed Energy and Electro-Optical Systems for a variety of customers and platforms. These solutions are typically employ embedded processing hardware using combination of FPGA's and general purpose processors. Primary Responsibilities: Develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software systems Develops and maintains code and integrates software components into a fully functional software system Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Works under general direction Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Boeing United States
May 18, 2019
Full time
Boeing Defense Systems (BDS) is looking for a talented Reliability & Maintainability (R&M) systems thinker and engineer to support the design and analysis of state-of-the-art weapon systems throughout the St. Louis Region. Position Responsibilities: The successful candidate is a self-starter with the ability to plan, design, develop, and verify a balanced life-cycle system solution is achieved. They will be able to perform, lead, and develop teammates, design teams, and sub-tier suppliers with the following responsibilities: Influence design characteristics in a collaborative environment and assist with the evaluation of customer/operational needs to define system performance requirements. Clearly conveys information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message. Takes prompt action to accomplish objectives; takes action to achieve goals beyond what is required; is proactive. Applies specific knowledge of aircraft systems (e.g., avionics, hydraulic, electrical, egress systems), components (e.g., multifunction displays wing, engine, landing gear transmission), and loadable/non-loadable software (e.g., radar operational programs, inertial navigation programs, operational flight programs). Reviews engineering specifications, drawings, and engineering artifacts to propose design modifications that improve cost and performance characteristics. Analyzes customer provided requirements and develops an R&M program plan that achieves customer objectives. Allocates top level requirements to design team specifications and work statements. Develops R&M predictions and tracks performance. Analyzes system and individual part parameters to develop projected product utilization and calculates cumulative effect on final system reliability. Leads failure mode and effect analysis and formulates mathematical models to identify items posing excessive failure and safety risks and proposed changes in design and maintenance strategies Develops computer models and uses the results to analyze, predict, adjust, and verify design and strategies and requirements. Active participant on design teams, provides guidance and recommendations to designers and management to ensure reliability and maintainability objectives are achieved. Interfaces with the customer and management at major design review meetings and technical interface meetings to provide findings and recommendations. Determines test profiles for units requiring environmental type testing and specifies specific objectives of the tests and defines successes criteria. Observes tests at various suppliers and field locations to evaluate factors and provides leadership during corrective action investigations. Monitors failure data generated by product users to assess performance in the field and develop strategies for product improvement. Applies risk assessment methodologies (e.g., hazard severity, probability or likelihood of occurrence), and tools (e.g. fault tree analysis, failure modes effects analysis, connector pin analysis, sneak circuit analysis, software safety analysis.) Provides inputs to proposals for submittals to customers. Review subcontractors' proposals for reliability program and submits evaluation for decision. The selected systems engineering candidate may also be tasked with performing critical analyses in one or more areas of Specialty Engineering such as systems safety, human systems engineering, affordability, survivability, vulnerability, susceptibility, regulatory, certification, and/or other engineering areas that drive a preferred configuration and ensure mission success. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Boeing Annapolis, MD, USA
May 18, 2019
Full time
THIS POSITION REQUIRES AN ACTIVE TS/SCI WITH POLYGRAPH CLEARANCE Boeing Intelligence & Analytics (BI&A) is seeking a Systems Engineer (Data Modeler) to join their software development team that provides application development and support to a tool that provides disseminatable data to be conveyed at the absolute first point of relevance allowing mission analytic users to view existing data or contribute new information in a collaborative environment. LOCATION: Annapolis Junction, MD DUTIES TO INCLUDE: System Engineer (Data Modeler) will provide software engineering support to the data ingest team to build out common data extraction, transformation, and load (ETL) of native knowledge outputs from source systems into a modernized set of repositories powering the customer framework. TYPICAL EDUCATION/EXPERIENCE: Bachelor's degree in System Engineering, Computer Science, Information Systems, Engineering Science, Engineering Management, or related discipline from an accredited college or university is required. Note: Nineteen (19) years of SE experience may be substituted for a bachelor's degree. BASIC (REQUIRED) QUALIFICATIONS: Experience with data modeling, data architecture Experience with Extract, Translate, and Load (ETL) operations and a firm grasp of dataflow ingest into Elasticsearch and Oracle Experience with TechSIGINT data 14+ years' experience with: Providing technical direction for the development, engineering, interfacing, integration, and testing of specific components of complex software systems to include requirements elicitation, analysis and functional allocation, conducting system requirements reviews, developing concepts of operation and interface standards, developing system architectures, and perform technical assessment Implementing operational view, technical standards view, and system and services view for architectures using applicable DoDAF standards. Reviewing and/or approving system engineering documentation ensuring that processes and specifications meet system needs and are accurate, comprehensive, and complete Developing system engineering documentation, such as System Engineering Plans, Initial Capabilities Documents, Requirements Specifications, and Interface Control Documents Managing and ensuring the technical integrity of the system baseline, continually updating as various changes are imposed on the system during the lifecycle from development through deployment and operations & maintenance Developing scenarios (threads) and an Operational Concept that describes the interactions between the system, the user, and the environment, that satisfies operational, support, and maintenance, and disposal needs DESIRED QUALIFICATIONS: Experience with Oracle, SQL, or other relational databases Experience with ElasticSearch Experience as an Agile SCRUM Master Experience working in an Agile software development environment Experience generating technical documentation Experience using with Jira and Confluence CLEARANCE: Applicants selected will be subject to a security investigation and may need to meet eligibility requirements; TS/SCI clearance with polygraph is required. BI&A is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race,color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Equal Employment Opportunity is the Law (PDF) BackEmailApply Now Apply
Boeing Annapolis, MD, USA
May 18, 2019
Full time
THIS POSITIONS REQUIRES AN ACTIVE TS/SCI WITH POLYGRAPH Boeing Intelligence & Analytics (BI&A) PRIME contract is seeking a Senior Software Systems Engineer to joun their top-tier team. Title: Senior Software Systems Engineer - Top Secret SCI with Polygraph Job Description: We are looking for hardworking, dedicated software professionals to work in a fast-paced, dynamic environment supporting our national Cyber infrastructure. Our team is responsible for creating and maintaining core infrastructure components for a framework that is used across the enterprise and we are currently in need of top-notch developers to support this mission-critical development. Responsibilities also include the development of new components (C++ and Python) to support mission-based systems. In addition to new development, we also support existing components across the enterprise to include the troubleshooting of fielded systems that are using the framework in operational environments. Education: Bachelor's Degree in Electrical Engineering, Computer Engineering or Computer Science and 8-15 years of applicable Software Systems Engineering experience or 14-19 years of applicable Software Systems Engineering experience Duties: Our team is seeking smart, experienced engineers with solid software development background who are familiar with agile development techniques, to create new components and implement complex infrastructure baselines that are built on a Software Defined Radio (SDR) paradigm. Any experience with SDR is a definite plus. Seeking individuals who can: Provide technical guidance in software design and development activities. Assist in the maintenance and upgrade of existing software applications. Work with other Engineers in planning, prioritizing and executing assigned tasks within deadlines. Recommend new technologies to ensure quality and productivity. Required Skills: Demonstrated hands-on development of collection systems and/or related components within the IC C++ development experience XML/XSD experience Linux/Unix experience (CentOS 6 and 7, but all flavors are accepted!) Scripting language experience, such as Python or Perl Multi-threaded software development experience Direct experience using CM tools such as Subversion/Trac or Git Experience with Digital Signal Processing (DSP) and/or protocol processing in software Direct development experience with Inter-process communication (IPC) mechanisms Working knowledge of Service Oriented Architecture principles Direct development experience with SIA/middleware technologies such as ICE, CORBA, ESB, SOAP Desired Skills: In addition to the required skill list above, the ideal candidate will have some level of familiarity with the following: Experience with the processing frameworks such as XMidas , SCCA, GNURadio , etc. Working knowledge of commercial wireless standards Working knowledge of geolocation techniques such as TDOA, FDOA, etc. and geolocation services BI&A is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race,color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Equal Employment Opportunity is the Law (PDF) BackEmailApply Now Apply
Boeing United States
May 17, 2019
Full time
THIS POSITION REQUIRES AN ACTIVE TS/SCI WITH POLY CLEARANCE Boeing Intelligence & Analytic ("BI&A"), a subsidiary of The Boeing Company, is seeking a Senior Software Developer to join their top-tier team. DUTIES WILL INCLUDE: The Software Engineer will support the Application Messaging Framework (AMF). Responsible for the design, development and testing of enterprise software in multiple systems across the Customer enterprise. REQUIRED EDUCATION AND EXPERIENCE 8+ years of Software Engineering experience, to include: ​5+ years of experience developing enterprise-grade Java applications 1+ year of experience writing software using message-oriented middleware such as JMS, AMQP, STOMP, or MQTT 3+ years work experience in the SIGINT, IA, or IT domains Knowledge of the Spring Framework and Dependency Injection Ability to debug and resolve application errors in a timely and effective manner Experience developing, deploying, and maintaining software in an Enterprise Linux environment Experience developing software with Git, Maven and Gradle Bachelor's Degree or higher in Computer Engineering or in a related field Demonstrated strong background developing enterprise-grade Java applications with experience matching the skills outlined below. ​ DESIRED EXPERIENCE (although NOT required) : Experience using Apache Kafka as a distributed messaging service Stream processing experience using Apache Storm or similar framework Complex Event Processing (CEP) experience Experience designing and developing applications using MongoDB or a similar NoSQL database Experience using distributed in-memory data stores such as Redis Application containerization experience using Docker BI&A is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race,color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Equal Employment Opportunity is the Law (PDF) BackEmailApply Now Apply
Boeing United States
May 17, 2019
Full time
The Boeing Company is seeking Experienced Mechanical Systems Design Engineers. Mechanical Design positions are available in the following areas: Landing Gear, Ordnance, Environmental Control Systems, Hydraulics, Thermal Analysis, Fuel Systems, and Mechanical Subsystems. These positions are located in St. Louis, MO. The positions support multiple current and emerging aircraft and weapons programs in the Strike, Surveillance, and Mobility and Phantom Works businesses. Position Responsibilities: Leads the development and documentation of mechanical and fluid systems, and thermal environments. Leads the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers. Leads detail design development and modification of mechanical and fluid system installations using relevant CAD and analysis tools (i.e. Catia/NX, AMESim, MatLab, etc). Leads teams in performing spatial integration at system or component level. Assists in preparing technical documents for mechanical components and systems. Assists in supporting proposal preparation and new business development efforts. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world. Division BDS Engineering Relocation Assistance Available Yes. Available for eligible candidates, if authorized. Qualifications Basic Qualifications (Required Skills/Experience): This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. Experience in mechanical system design. Strong analytical, communication and problem solving skills. Desired Qualifications (Preferred Skills/Experience): Significant experience with mechanical design principles and systems, mechanical components, mechanical analyses, and basic mechanical test equipment and standard equipment. Ability to develop and guide others to create solutions to a wide range of complex technical problems, requiring ingenuity and innovation. Goal-oriented, have a strong work ethic, and have demonstrated technical leadership skills. Ability to multi-task and work in a multi-company team environment. Bachelor's degree or higher from an accredited course of study, in Mechanical Engineering or Aerospace Engineering. ABET Accreditation is preferred. Typical Education/Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Experience Level Individual Contributor Job Type Standard Travel Yes, 10 % of the Time Contingent Upon Program Award No Union No Job Code 6G5BP4 Apply
Boeing Albuquerque, NM, USA
May 17, 2019
Full time
Boeing Laser and Electro-Optical systems develops high performance Directed Energy and Electro-Optical Systems. These solutions typically include high/low power laser systems, high performance sensors and custom designed optical systems. Engineer would work as part of a multi-disciplinary team supporting the development of both directed energy and electro-optical systems. We are looking for an experienced Electro-Optical Engineer to help support our team in Albuquerque, New Mexico. Primary Responsibilities: Develops and validates requirements for various complex electro optical, laser and sensor systems and components. Develops and validates electro-optic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Manages major sections of proposals to support development of new business. Works under minimal direction. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world. Division Missile and Weapon Systems Relocation Assistance Available Yes. Available for eligible candidates, if authorized. Qualifications This position requires the ability to obtain U.S Security Clearance, for which the U.S. Government requires U.S. Citizenship. Typical Education and/or Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Basic Qualifications (Required Skills and Experience): Minimum 5 years of optical design experience utilizing tools such as Zemax, Code V or FRED. Minimum of 2 years of laboratory experience with components such as lenses, beam splitters, steering mirrors, sensors (visible through LWIR), lasers, position sensing devices, and laser rangefinders required. Minimum of 2 years modeling and simulation experience with a technical computing language, such as Matlab or Mathematica. Preferred Skills (Desired Skills and Experience): Experience with lens design, high energy lasers, fiber laser combining, radiometry, atmospheric propagation, laser radar and adaptive optics. Experience Level Individual Contributor Job Type Standard Travel Yes, 10 % of the Time Contingent Upon Program Award No Union No Job Code 6B1EP4 Apply
Boeing El Segundo, CA 90245, USA
May 17, 2019
Full time
Description The Boeing Company is seeking a Mid-Level Space Systems Model Based Systems Engineer (MBSE) to join a project team assisting with the development of complex, state-of-the-art systems for space-based applications for commercial and government customers. You will be a member of a high performance systems engineering team interacting with customers, suppliers, program management, integration and test engineers and senior technologists. You will participate in all phases of the system development life cycle, including concept of operations development, requirements development, analysis and decomposition, software and hardware system design, algorithm design, risk management, integration, test and documentation. The successful candidate will be leading development of Model Based Systems Engineering (MBSE) practices in current and future large scale satellite systems programs. Primary Responsibilities Develop system-level concept of operations (CONOPs), perform functional analysis and decomposition to meet end user needs using Model Based Systems Engineering tools and techniques. Develop formal systems requirements for satellite system space and ground elements. Develop system designs that satisfy the system requirements. Conduct trade studies and briefings to support the selection of algorithm approaches. Develop and extend system models using existing requirements, interface document, and related design and system engineering documents. Support MBSE integration/development activities. Participate in design review and customer presentations. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world. Qualifications This position requires an active/current Single Scope Background Investigation (SSBI) U.S. Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.) Basic (Required) Qualifications Successful completion of a Single Scope Background Investigation (SSBI) by the federal government within the last 5 years. Bachelor's Degree or higher is required. Experience in space systems design, architecture definition, and analysis. Knowledge of Model Based Systems Engineering approaches, methods, and techniques. Experience with Model Based Engineering tools and languages such as Enterprise Architecture, Rhapsody, Cameo, MagicDraw, and UML/SysML. Preferred (Desired) Qualifications Systems Engineering leadership experience in development, integration, validation, and verification. Experience performing system level trade studies. Experience in modeling, simulation, analysis and end-to-end visualization techniques. Typical Education & Experience Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
Boeing Albuquerque, NM, USA
May 17, 2019
Full time
Boeing Laser and Electro-Optical systems (LEOS) develops high performance Directed Energy and Electro-Optical Systems for a variety of customers and platforms. These solutions are typically employ embedded custom electronics and processing hardware using combination of FPGA's and general purpose processors. Boeing LEOS is looking for highly skilled and adaptable Experienced Electrical Engineers to perform design, analysis and test of digital and analog electronics. Engineer would work as part of a multi-disciplinary team supporting the development of both directed energy and electro-optical systems. This positon is located in Albuquerque, New Mexico. Primary Responsibilities: Review of system requirements to develop specifications and technical documentation in support of design reviews. Design, development, test and qualification of new embedded electronics; both analog and digital circuits including the design of FPGA and processor electronics. Specify and select electronics components, generate schematics and develops and/or assists in PCB layouts. Hands on in laboratory checkout and test of prototype electronics including the ability debug and troubleshoot electronics designs, and to work with electrical technicians to facilitate real-time changes to the electronics. Boeing is the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. As America's biggest manufacturing exporter, the company supports airlines and U.S. and allied government customers in more than 150 countries. Division Missile and Weapon Systems Relocation Assistance Available Yes. Available for eligible candidates, if authorized. Qualifications This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. Typical Education/Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Basic Qualifications (Required Skills and Experience): Experience designing, developing, testing, qualifying new embedded electronics. Experience working with laboratory checkout and test of prototype electronics including the ability to debug and troubleshoot electronics designs. Preferred Qualifications (Desired Skills and Experience): Experience working with electro-optical systems. Experience with developing on or interfacing to Field Programmable Gate Arrays (FPGAs). Experience working in research and development environment. Experience with model based design. Experience Level Individual Contributor Job Type Standard Travel Yes, 10 % of the Time Contingent Upon Program Award No Union No Job Code 6B1DP4 Apply
Boeing United States
May 17, 2019
Full time
Boeing Defense, Space, and Security (BDS) In-Space Vehicles Engineering, located in El Segundo, CA, is seeking a highly skilled and motivated Experienced Antenna/Array Subsystems Engineer (Level 4). As an Antenna/Array Subsystems Engineer, you will work on satellite antenna/payload products and capabilities that help our customers to meet their mission requirements. Primary Responsibilities • Applies an interdisciplinary, collaborative approach to lead activities to plan, design, develop and verify complex antenna/array systems - communication, sensor, electronic warfare and other electromagnetic systems and components. • Evaluates customer and /operational needs to define and coordinate antenna/array system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. • Performs various analyses to optimize total system architecture. • Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. • Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements. • Leads, develops designs and conducts research that results in new requirements management methodologies or result in unique approaches that mitigate assessment/review findings. • Creates and implements strategic approaches for program and business area decisions. Boeing is the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. As America's biggest manufacturing exporter, the company supports airlines and U.S. and allied government customers in more than 150 countries. Boeing products and tailored services include commercial and military aircraft, satellites, weapons, electronic and defense systems, launch systems, advanced information and communication systems, and performance-based logistics and training. With corporate offices in Chicago, Boeing employs approximately 145,000 people across the United States and in more than 65 countries.
Boeing El Segundo, CA 90245, USA
May 04, 2019
Full time
El Segundo,California,United States 6B1DP4 Boeing Defense Space & Security seeksSenior Digital ASIC/FPGA Design Engineers to support the Satellite Capabilities organization and multiple satellite product lines based in El Segundo, CA.Position Responsibilities:Utilize high-level architectural documentation along with algorithm description and implement DSP functions for functions such as decimation, interpolation, general filtering, up-down conversion, digital beamforming, and channelization. Develop mathematical models in SystemVerilog to verify design implementation and develop and run scripts and Make files. Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products.Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product.Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.This position must meet Export Control compliance requirements, therefore a US Person as defined by 22 C.F.R. 120.15 is required. US Person includes US Citizen, lawful permanent resident, refugee, or asylee.Basic Qualifications (Required Skills/Experience):5 or more years of experience in Digital ASIC design or FPGA verification. Experience with ASIC development including architectural definition, detailed design implementation using SystemVerilog, and functional verification using SystemVerilog. Experience with design architecture and detailed specification generation. Preferred Qualifications (Desired Skills/Experience):Knowledge and competency of UVM. Thrive in working within a fast-paced environment and work well in a team of ASIC/FPGA engineers and Subsystem engineers. Demonstrated history of 1st pass success with ASIC/FPGA designs. Typical Education/Experience:Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Yes, 10 % of the Time Space and Launch Individual Contributor No No Standard United States; The Boeing Company
Boeing El Segundo, CA 90245, USA
May 04, 2019
Full time
El Segundo,California,United States 6C1LP6 The Boeing Company is seeking a senior, highly skilled, and motivated Satellite Payload Integrated Product Team (IPT) Leader to be part of our In-Space Vehicles Engineering team. As the Payload IPT Leader, you will lead a talented cross-discipline team in the development and delivery of advanced satellite payload systems that serve critical missions for our US and international customers. The IPT Leader provides critical satellite program leadership with responsibilities that include delivering on all cost and schedule program commitments, technical performance/management of products through delivery, and managing risk and opportunities. This position is located in El Segundo, CA.Boeing Satellite Systems is the world's #1 company in government & commercial satellite communications. Join our vision to be the epicenter of the next space revolution by creating the future of global connectivity & assured information solutions.Primary job responsibilities: Provides leadership and project management for satellite payloads. Accountabilities include cost, technical, schedule, and risk management. Provides support for Business Development efforts. Will have primary responsibility authority accountability (RAA) for program execution and program battle rhythm including earned value, technical performance metrics reporting, cost account management, and communications/briefing to executive leadership - highlighting and project managing program cost, schedule, risk/mitigation, and technical performance while providing timely affordable, lean, root cause/corrective action-based solutions. Will be a skilled project manager with career-experience and knowledge in leading Non-Recurring engineering (NRE) efforts, project baseline development, resource loading, project breakdown structure (WBS/PBS) activities and program-level metrics. Ensures preparation of the master plan and schedule, such as Integrated Master Plan and Integrated Master Schedule [IMP/IMS], and First Article Plan, through coordination and conflict resolution with other Boeing teams, functions, and organizations, as well as customers, suppliers and other stakeholders. Integrates relevant lessons learned from previous programs. Develops and communicates responsibility authority accountability (RAA) to define team members' roles and responsibilities. Lead interface for The Boeing Company, working with supplier, customer and end-user communities.Boeing is the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. As Americas biggest manufacturing exporter, the company supports airlines and U.S. and allied government customers in more than 150 countries. Boeing products and tailored services include commercial and military aircraft, satellites, weapons, electronic and defense systems, launch systems, advanced information and communication systems, and performance-based logistics and training. With corporate offices in Chicago, Boeing employs approximately 145,000 people across the United States and in more than 65 countries. As part of Space and Launch, In-Space Vehicles Engineering, based in Los Angeles, CA, manages the company's major commercial and government satellite and ground programs for communications, national defense and other missions.Typical Education / Experience: Degree and typical experience in engineering classification: Bachelor's and 20 or more years' experience, Master's with 18 or more years' experience or PhD with 15 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standardBasic Qualifications (Required): Five (5) or more years of experience in Program Management or IPT Leadership including cost, schedule, technical and risk management. Ten (10) or more years of full time aerospace industry experience within Mechanical, Structural, Payloads, Design, Analysis, or Production Liaison engineering. This position requires the ability to obtain U.S. Security Clearance, for which the U.S. Government requires U.S. Citizenship.Preferred Qualifications: Experience with satellite payload subsystems, including systems engineering, payload layout, wire harness, antenna subsystems, payload electronics, and passive microwave devices. Experience with the payload subsystem lifecycle: design, analysis, manufacturing, procurements, and assembly, integration, and test. Experience with mechanical systems engineering, structural dynamics, thermal analysis, thermal (multi-layer insulation) blanket, primary load structures, tooling, deployable structures. Successful completion of a Single Scope Background Investigation (SSBI) by the federal government within the last 5 years. Yes, 10 % of the Time Space and Launch Individual Contributor No No Standard United States; The Boeing Company
Boeing El Segundo, CA 90245, USA
May 04, 2019
Full time
El Segundo,California,United States 6B1DP2 Boeing Defense Space & Security seeksJuniorDigital ASIC/FPGA Design Engineers to support the Satellite Capabilities organization and multiple satellite product lines based in El Segundo, CA.Position Responsibilities:Utilize high-level architectural documentation along with algorithm description and implement DSP functions for functions such as decimation, interpolation, general filtering, up-down conversion, digital beam forming, channelization, and be able to develop mathematical models in SystemVerilog to verify design implementation and develop and run scripts and Make files.Maintains detailed requirements and specifications for various electronic products.Develops detailed designs of limited scope.Conducts various methods of testing and analysis to support design.Gathers data for technical performance measures and performs basic analysis.Provides basic engineering support throughout the lifecycle of the product. Conducts trade studies and literature research to support future product designs.Works under general supervision.Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.This position must meet Export Control compliance requirements, therefore a US Person as defined by 22 C.F.R. 120.15 is required. US Person includes US Citizen, lawful permanent resident, refugee, or asylee Basic Qualifications (Required Skills/Experience):Experience in Digital ASIC design and verification.Experience with ASIC development including architectural definition, detailed design implementation using SystemVerilog, and functional verification using SystemVerilog.Experience with design architecture and detailed specification generation. Preferred Qualifications (Desired Skills/Experience):Knowledge and competency of UVM.Thrive in working within a fast-paced environment and work well in a team of ASIC engineers and Subsystem engineers. Demonstrated history of 1st pass success with ASIC designs.Typical Education and ExperienceDegree and typical experience in engineering classification: Bachelor's and 2 or more years' experience or a Master's degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Yes, 10 % of the Time Space and Launch Individual Contributor No No Standard United States; The Boeing Company
Boeing El Segundo, CA 90245, USA
May 04, 2019
Full time
El Segundo,California,United States 6C1LP5 Position Overview:In-Space Vehicles Engineering, located in El Segundo, CA, is seeking a career experienced, highly skilled, and motivated Level 1 Payload IPT (Integrated Product Team) Leader. Candidate will lead a cross-discipline team in Payload subsystem program execution. The responsibilities include delivering on all cost and schedule program commitments, technical performance/management of products through delivery, and managing risk and opportunities.Primary Responsibilities:Candidate will be a leading interface for The Boeing Company, working with supplier, customer and end-user communities. Candidate will have primary responsibility, authority and accountability (RAA) for program execution and program battle rhythm including earned value, technical performance metrics reporting, cost account management, and communications/briefing to executive leadership - highlighting and project managing program cost, schedule, risk/mitigation, and technical performance while providing timely affordable, lean, root cause/corrective action-based solutions. Candidate will be a skilled project manager with career-experience and knowledge in leading Non-Recurring engineering (NRE) efforts, project baseline development, resource loading, project breakdown structure (WBS/PBS) activities and program-level metrics. Candidate will ensure preparation of the master plan and schedule, such as Integrated Master Plan and Integrated Master Schedule [IMP/IMS], and First Article Plan, through coordination and conflict resolution with other Boeing teams, functions, and organizations, as well as customers, suppliers and other stakeholders. Integrates relevant lessons learned from previous programs. Verifies all deliverables and statement of work items for complex projects are completed by comparing finished products, services, and other deliverables to statement of work and other contractual requirements. Compares actual results to baseline plan to assess project performance, efficiencies, productivity, and lessons learned. Archives documentation according to approved records retention schedule. Boeing is the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. As Americas biggest manufacturing exporter, the company supports airlines and U.S. and allied government customers in more than 150 countries. Boeing products and tailored services include commercial and military aircraft, satellites, weapons, electronic and defense systems, launch systems, advanced information and communication systems, and performance-based logistics and training. With corporate offices in Chicago, Boeing employs approximately 145,000 people across the United States and in more than 65 countries. As part of Space & Missile Systems, In-Space Vehicles Engineering, based in Los Angeles, CA, manages the company's major commercial and government satellite and ground programs for communications, national defense and other missions.Typical Education/Experience:Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.Work Authorization:This position requires the ability to obtain U.S. Security Clearance, for which the U.S. Government requires U.S. Citizenship.Basic Qualifications (Required Skills & Experience):Experience in Program Management or IPT Leadership including cost, schedule and technical management Full time aerospace industry experience within Mechanical, Structural, Payloads, Design, Analysis, or Production Liaison engineeringPreferred Qualifications (Desired Skills/Experience): Ideal candidate will have extensive experience with satellite payload subsystems, including systems engineering, payload layout, wire harness, antenna subsystems, payload electronics, and passive microwave devices. Additionally, candidate will understand the payload subsystem lifecycle: design, analysis, manufacturing, procurements, and assembly, integration, and test. Prefer candidate to have additional knowledge and experience with mechanical systems engineering, structural dynamics, thermal analysis, thermal (multi-layer insulation) blanket, primary load structures, tooling, deployable structures. An Active SSBI clearance is preferredpre-start. Yes, 10 % of the Time Space and Launch Individual Contributor No No Standard United States; The Boeing Company
Boeing Oklahoma City, OK, USA
Apr 27, 2019
Full time
Oklahoma City,Oklahoma,United States 6G5CP5 The Boeing Defense, Space & Security (BDS) organization is seeking Structural Design Engineers (level 5)to join the Structures Engineering team located in Oklahoma City, Oklahoma. As a member of this team, you will execute structural modifications and upgrades for Bomber programs, Executive Transport Services & Support (ETS), and Airborne Surveillance Command and Control (ASC2). PositionResponsibilities:Perform structural design technical lead tasks for Structures Capability Team. Developdetail and modification design concepts/final design and meeting contractual/producibility requirements for end item deliverables to include structural modifications, mechanical components and primary and secondary structural detail/installation design for Development and Production purposes.Responsible for the integration of detail design of parts, hardware installation, and support to planning/manufacturing efforts and associated tools. Analyzes and resolves design problems, assist others with resolving design discrepancies and analyze the applicability of new and emerging technologies and advanced techniques. Support internal and external design reviews, Technical Interchange Meetings (TIMs), Preliminary/Critical Design Reviews (PDR/CDR) with US and Foreign Air Force customers. Provide design expertise and technical knowledge to resolve customer inquiries for post production fleet sustainment.Document processes, specifications and procedures that support the design and manufacture of structural commodities.Develop complex statements of work, metrics, schedules and budgets.Perform technical review of supplier capabilities to facilitate source selection. Support new business and proposal activities.Work under minimal direction.Candidate should be willing to discuss and negotiate issues with various groups, including;Air Vehicle designSystems Design & RequirementsElectromagneticCompatibility/Electromagnetic InterferenceParts, Materials, and ProcessesLogistics (Technical Publications, Training, Spares, In Service Support)Other internal/external customers and suppliers. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.Security Clearance and Export Control Requirements:This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship.Basic Qualifications (Required Skills/Experience):Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.2D & 3D design experience.Experience with aerospace structural design.5 or more years of experience in structural design.Experience with customer facing role.Preferred Qualifications (Desired Skills/Experience):Experience leading teams or projects. Experience creating structural/mechanical designs using CATIA V5 & Enovia. Working experience in applicable electrical system analysis tools.Experience using the following tools; OPP, Microsoft Project, and/or Primavera. Experience with Earned Value Management (Scheduling, Budgeting, Cost Analysis).Current/Active Secret U.S. Security Clearance or a Single-Scope Background Investigation (SSBI) is a PLUS (A U.S. Security Clearance that has been active in the past 24 months is considered active). Typical Education/Experience: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Yes, 10 % of the Time SSM Individual Contributor No No Standard United States; The Boeing Company
Boeing Oklahoma City, OK, USA
Apr 27, 2019
Full time
Oklahoma City,Oklahoma,United States 6G5CP2 Are you interested in a rewarding engineering career at a company that supports our nations warfighters? The Boeing Defense, Space & Security (BDS) organization is seeking Structural Design and/or Analysis Engineers (Level 2) to join the Structures Engineering team located in Oklahoma City, OK. As a member of this team, youll be involved in developing structural modifications and upgrades for one of the following three programs: Bombers, Executive Transport Services & Support (ETS) fleet, and Airborne Surveillance Command and Control (ASC2). The Boeing Company has seen significant growth in Oklahoma in recent years and were looking for qualified engineers to be part of our team.Position Responsibilities:Assists to develop, integrate and document structural and interior payload system requirements to establish the system design.Develops, maintains and modifies basic structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product life cycle.Performs tests to validate and verify systems and components meet requirements and specifications.Assists with supplier development, test and production activities and coordination with the supplier to optimize the design and achieve program goals.Supports investigation of emerging technologies to develop concepts for future product designs to meet projected requirements.Works under general supervision.Relocation: This position is based in Oklahoma City, OK and does not offer relocation assistance. Applicants must reside in area or be willing to relocate at their own expense.Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.This position must meet Export Control compliance requirements, therefore a US Person as defined by 22 C.F.R. 120.15 is required. US Person includes US Citizen, lawful permanent resident, refugee, or asylee. This position requires the ability to obtain a US Security Clearance, for which the US Government requires US Citizenship.Basic Qualifications (Required Skills/Experience):Ability to work conceptual, preliminary and detailed design including 2D drawings and 3D deliverablesExperience or completed coursework in computer-aided design (CAD) tools to design mechanical components, subassemblies, or systemsPreferred Qualifications (Desired Skills/Experience):Experience creating structural / mechanical designs using CATIA & EnoviaAerospace or Mechanical Engineering degreeBasic knowledge of structural design principles and practices from requirements generation to production and product supportBasic knowledge of airplane structural repair methodsConsiders how day-to-day actions will affect customers; responds quickly to help more experienced employees meet customer needs and resolve problemsTypical Education/Experience:Bachelors and 2 or more years experience or a Masters degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Yes, 10 % of the Time SSM Individual Contributor No No Standard United States; The Boeing Company